A printable plain text version is also available.
Date: Tue, 30 Jul 2002 18:29:09 -0500 (EST)
From: ImageStream Support 
Subject: SAND Version 3.5.8 available

Version 3.5.8 of ImageStream's Standard Architecture for Network Drivers
(SAND) is now available as a general release for all ImageStream
customers.

ImageStream router customers will receive Version 3.5.8 of SAND as a part
of the Enterprise Linux 4.0.2 release.

This software release is provided at no charge to all ImageStream
customers, and is recommended for all customers who wish to upgrade to the
latest available software release.  This release supports kernel versions
through 2.4.18 and later kernels.

This release note documents commands and features added between Version
3.5.7 and Version 3.5.8.


----------------------------


New Features in Version 3.5.8


Frame Relay LMI Can Be Disabled

Version 3.5.8 of SAND supports a new frame relay command that disables the
use of LMI:

frame-relay lmi-type none

Specifying an LMI type of "none" will instruct the SAND frame relay
subinterface to ignore LMI.  Protocol status on the subinterface will
follow the hardware status.  LMI packets from the connected frame relay
switch, if they exist will be ignored and DLCI/IP pairs will be added
staticly.


----------------------------


Bugs fixed in Version 3.5.8


The following bugs have been fixed in SAND Version 3.5.8:


Error Setting T1 Timeslots Fixed

SAND 3.4.x versions failed to properly set the channels when the
"service-module t1 timeslots all" command was used without specifying the
speed of the channels using the "speed" keyword.  In this scenario,
Version 3.5.8 correctly sets timeslot usage to all timeslots and uses the
default channel speed of 64 Kbps.


----------------------------


Copyright and Trademarks


Copyright 2002 ImageStream Internet Solutions. All rights reserved.

ImageStream is a trademarks of ImageStream Internet Solutions, Inc.  All
other marks are the property of their respective owners.

Notices

ImageStream makes no representations or warranties with respect to the
contents or use of this document, and specifically disclaims any express
or implied warranties of merchantability or fitness for any particular
purpose. Further, ImageStream reserves the right to revise this
publication and to make changes to its content, any time, without
obligation to notify any person or entity of such revisions or changes.

Contacting ImageStream Technical Support

Every ImageStream product comes with a one year hardware and software
warranty.  ImageStream provides technical support via voice, FAX,
electronic mail, and the web. Technical support is available 24 hours a
day, 7 days a week.

To contact ImageStream technical support by voice, dial +1 (574) 935-8484
worldwide. By FAX, dial +1 (574) 935-8488. By electronic mail, send mail
to support@imagestream.com. Using the World Wide Web, see
http://www.imagestream.com/